Bench Top WVO Oil Centrifuge Maximize

Automatic Bench Top WVO Oil Centrifuge

Fully Automatic 3000G WVO Biodiesel Waste Motor Oil Centrifuge

More details

  • US Filtermaxx
  • Leeson
  • 1-phase 208-240 V
  • 3-phase 208-230 V
  • None
  • 1 Heater - 1500 W
  • 2 Heaters - 3000 W
  • No
  • Yes
  • No
  • Yes
  • Economy
  • Deluxe

Availability: In Stock! Get Yours Today


You have better things to do than sit around watching your oil cleaning process, our fully automatic WMO centrifuge starts, stops, dumps sludge, monitors flow and controls the temperature for 24 hour a day unattended operation!

If you are tired of clogged filters, broken pumps and hydraulic nightmares then you need an oil cleaning tool that will do the job right without all the time and energy spent changing filters, or fixing leaking high pressure pumps and lines.

Our low rise  bench top centrifuge is great for filtering all fluids including cutting and grinding fluids, WVO waste motor oil, and hydraulic oils. Small enough to be portable, big enough to filter up to 500 gallons of oil per day or up to 960 Gallons of biodiesel. Dirt and water are helpless against the 3000G power of the US Filtermaxx Bench Top Industrial Centrifuge. Baldor motor and Leeson options are available. Color may vary.

Product Combinations

  • Baldor Motor can only be used with the 3-phase Electrical Configuration.
  • Leeson Motor can only be used with the 1-phase Electrical Configuration.
  • Economy Controller cannot have the Flow Sensor or 2 Heaters. It can have up to 1 heater.

US Filtermaxx 3000G Features:

  • Designed, made and tested in USA.
  • Submicron Particulate Removal
  • Forced Ventilation exhausts vapors released during processing waste oils or biodiesel. Prevents contamination of clean oil by water vapor and ventilates methanol vapors.
  • Clean oil and dirty oil are separated by an internal dam
  • Feed plate distributes oil evenly around circumference does not channel oil into a few small spots or use a wobbly cone.
  •  1.5 hp industrial electric motor.
  • 240V single phase or 3 phase 230V/460V pre-wired motors available.
  • Footprint fits on top of 55 gallon drum.
  • Belt overdrive system drives the high-speed rotor while the motor runs at 1800 rpm for a quieter, cooler running, longer lasting centrifuge.
  • 165 cubic inches sludge capacity.
  • Input ¼ inch NPT. Output 1¼ inch NPT.
  • Operating load is taken by 1-inch diameter spindle with replaceable bearings, not the motor bearings as with some other centrifuges.
  • Bowl is removed by the quick release spindle in less than a minute.
  • Heavy duty 1 inch thick aluminum centrifuge body for rigidity and minimal vibration.
  • Rotor is machined aircraft grade aluminum casting.
  • Machine weight 200 pounds nominal.
  • Automatic controller (optional) allows unit to cycle and drain sludge for unattended cleaning of up to 500 gallons of oil per day! or up to 960 gallons of biodiesel.
  • Free shipping to the lower 48 states!