3000G Programmable Centrifuge Maximize

WMO Centrifuge with Programmable Controller 3000 G's

Start the machine and walk away with this programmable 3000G WVO Centrifuge. It cycles, dumps sludge and turns ifself off when the job is done.

More details

  • US Filtermaxx
  • Leeson
  • 1-phase 208-240 V
  • 3-phase 208-230 V
  • None
  • 1 Heater - 1500 W
  • 2 Heaters - 3000 W

Availability: Get one and get started today!

$3,726.00


A manual centrifuge is great for short runs and small batches but when you have 100 gallons or more to filter or clean oil on a regular basis, then an automatic WMO centrifuge is what you need. Starts, stops, dumps sludge, restarts and turns off after your run is complete.  Essential if you clean oil on a regular basis. Real industrial quality for commercial applications. Built to run 24/7. When it has to work and work all day every day then you need a US Filtermaxx!


Product Combinations

Includes Flow Sensor and Centrifuge Mounts.

 

US Filtermaxx 3000G Features:

  • Our Standard Centrifuge
  • Designed, made and tested in USA.
  • Submicron Particulate Removal
  • Forced Ventilation exhausts vapors released during processing waste oils or biodiesel. Prevents contamination of clean oil by water vapor and ventilates methanol vapors.
  • Clean oil and dirty oil are separated by an internal dam
  • Feed plate distributes oil evenly around circumference does not channel oil into a few small spots or use a wobbly cone.
  •  1.5 hp industrial electric motor.
  • 240V single phase or 3 phase 230V/460V pre-wired motors available.
  • Footprint fits on top of 55 gallon drum.
  • Belt overdrive system drives the high-speed rotor while the motor runs at 1800 rpm for a quieter, cooler running, longer lasting centrifuge.
  • Large 1 gallon displacement bowl that filters 360 to 1000 gallons of oil per day.
  • 165 cubic inches sludge capacity.
  • Input ¼ inch NPT. Output 1¼ inch NPT.
  • Operating load is taken by 1-inch diameter spindle with replaceable bearings, not the motor bearings as with some other centrifuges.
  • Bowl is removed by the quick release spindle in less than a minute.
  • Heavy duty 1 inch thick aluminum centrifuge body for rigidity and minimal vibration.
  • Rotor is machined aircraft grade aluminum casting.
  • Machine weight 120 pounds nominal.
  • 15 minutes from box to operation.
  • Automatic controller (optional) allows unit to cycle and drain sludge for unattended cleaning of up to 1000 gallons of oil per day!
  • Free shipping to the lower 48 states!